Wieland Electric’spodis®MSS 3I/W1.5 motor soft starter with reversing function was developed for soft starting and stopping of asynchronous standard motors. It can be implemented remotely or near the motor with an output of 0.09 kW to 1.5 kW.
Wieland Electric’spodis®MSS 3I/W1.5 motor soft starter with reversing function was developed for soft starting and stopping of asynchronous standard motors. It can be implemented remotely or near the motor with an output of 0.09 kW to 1.5 kW. The soft starter is part of the provenpodis®power bus system, which consists of an uncut flat cable power bus and various plug-in function modules and is implemented, for example, in conveyor systems and systems that are distributed over a large area.
Soft starting and stopping of a motor is needed in order to minimize the risk of goods being transported slipping or toppling over when the motor accelerates. Soft starting also makes sense as a way of limiting the torque to which the drive shaft and other transmission elements (e.g. gearboxes) are exposed, thus protecting them from mechanical overstressing. The ramp-up time, the ramp-down time For the trade press SPS/IPC/DRIVES 2010 November, 23– 25, 2010 Key word: Motor soft starterpodis®MSS 2 Press Release: 2010-11-267 and the breakaway torque can be adjusted continuously on the motor soft starter. It is controlled and parameterized via ASInterface. The motor starter is plugged directly into thepodis®CON flat cable outgoing feeder and is thus supplied with 400 V line voltage. It is universally pluggable. The motor and up to three sensors can be connected quickly without faults using RST round plug connectors or M12 plug connectors. The soft starter is equipped with electronic motor protection, which protects the motor from overloading. Various messages, such as"Ready for operation",“Motor overload” and “Sensor input status” are displayed via LEDs. These messages are forwarded to the higher-level controls.
No comments:
Post a Comment